| Brommeland Gunleather |
| Wilderness Instructor's Belts |
| Gear Store |
| U.S. Palm |
| Hennessy Hammocks |
| Ordering |
| Contact |
AK30
This new 30 round magazine fits all AK-47 rifles that use detachable double-stack magazines. The AK30 is constructed of proprietary aerospace polymers developed by TangoDown. The AK30 sets itself apart from other polymer magazines with its purpose-built design and multiple unique features.
We took input from numerous industry professionals; real world operators, military and police active duty personnel, firearms instructors, manufacturing experts, and polymer industry chemists. We did our research to ensure this magazine would be the best from day one.
By eliminating the removable floor plate we created a stronger design; a five-sided box. This revolutionary design, paired with advanced polymers gives the AK30 the strength it needs to survive impacts that would destroy other magazines. After the magazine is molded, the body and end-cap are bonded together at the molecular level, so no disassembly is possible or required. The AK30 has a unique low-friction semi-floating follower that is slotted to allow for easy magazine cleaning and hassle-free maintenance. Just dunk the magazine in hot soapy water, rinse and invert to drain. Dry contamination easily flows free through the vented follower design. The AK30 also features a chromium-silicon spring that is heat treated, stress relieved and US Mil Spec corrosion resistant coated. Life expectancy for this spring is 100,000+ cycles.
Internal design
Inside, there is a lot going on! The locking surfaces are reinforced by a stainless steel cage that has been molded into the entire top of the magazine to further ensure reliability for years of trouble free service.
External Design
Outside, our design team created a magazine that can be utilized by an operator in any condition. The aggressive ridges on the front and rear allow a positive purchase when seating the AK30 into the rifle. The deep waffle pattern on the magazine sides assist in rapid extraction from magazine pouches, and 100% positive manipulation within conditions beyond extreme. Every surface of the AK30 was given careful consideration to benefit the operator working in the harshest conditions on earth.
MSRP $29.95 (Please call for discounts on bulk orders of 6 or more magazines)
These magazines are not for sale to persons living in any area or jurisdiction in which they are restricted. Anyone purchasing these magazines assumes full and total responsibility for compliance with all federal, state and local laws and/or regulations.
Please note: I will not sell anything to a customer that I will not stake my own life on. Here is a copy of a letter that I sent US Palm (Dated 8 March 2011):
U.S. Primary Armament Logistical Manufacturing
16641 North 91st St.
Scottsdale, AZ 85260
Sir/Madame,
I am returning this mag for your inspection and replacement. I am presently awaiting the shipment of my first batch of inventory as a US Palm dealer. Before the decision was made to sell your product line, I felt that I needed to do a drop test on one of your mags inasmuch as I refuse to sell any product that I will not use myself. A fully loaded mag was placed in a freezer for 24 hours, removed and then dropped from a height of approx 55 inches (feed lips down) onto a concrete floor. While the mag did sustain a crack in the feed lips, it still fed and functioned flawlessly ( which was the object of the test). I performed this test side by side with a MagPul P-mag and it split down the spine, ejected rounds all over the place and was useless by comparison. You folks make a superb product to say the least.
Please ship a replacement mag to the address shown below, and add me to your list of dealers. Thank you!
Please note: US Palm subsequently included a replacement magazine with my order at no charge, no questions asked.
Avalible magazine colors, please specify color with order.
(Brown Bakelite, Black, Red Bakelite)